About the eSIM carrier profile
An eSIM carrier profile is a digital file stored on an eSIM that contains a cellular carrier’s identity information, which your Digi device uses to connect to that carrier’s cellular network. In Digi Remote Manager, this is called an eSIM profile. Each eSIM carrier profile is identified by its ICCID. An eSIM can store multiple eSIM carrier profiles, but only one can be active at a time.
eSIM carrier profiles are used for:
-
Identifying which eSIM carrier profiles are installed on each device’s eSIM.
-
Confirming which eSIM carrier profile is currently active on a device.
-
Supporting carrier changes and connectivity troubleshooting.
The carrier profile is stored on an eSIM. You can configure a preferred carrier profile, as well as configure SureLink to switch between carrier profiles when a connection cannot be made.
Think of a carrier profile as a digital file downloaded to the eSIM in a Digi device. This profile is no longer tied to a physical SIM card. Identity information becomes digital, not physical.
A profile typically includes:
-
IMSI (your subscriber ID)
-
Carrier settings (APN, network selection, etc.)
-
Security keys
-
Network authentication data
-
Rules for roaming
-
Profile name / provider info
This information gets securely stored on the eUICC (the built-in or inserted eSIM chip inside the device).
For Digi eSIM-capable devices, a carrier profile is used to allow the device to:
-
Connect to a chosen mobile carrier
-
Switch carriers remotely
-
Hold multiple carrier profiles at once
-
Remove or install profiles without physical SIM handling