About eSIM technology

eSIM technology is a method that enables carrier switching by using a programmable eUICC chip to store and manage digital cellular subscriber information. This programmable eUICC chip is a small, secure chip that can store and update digital credentials used to identify the device on cellular networks . This chip supports the downloading of one or more carrier profiles, activating one of those profiles for the eSIM to use, and switching between carrier profiles through software rather than relying on fixed, pre-programmed information. This combination enables the management of cellular connectivity through software instead of swapping physical SIM cards in and out of devices. This gives you more flexibility and control over how your Digi eSIM-capable devices connect to mobile networks, as well as the cellular plans you choose.

SIM interfaces and embedded eSIM chip behavior is configured in the DAL OS firmware via the cellular modem settings. You can monitor eSIM status in Digi Remote Manager by checking whether the device has successfully obtained a carrier profile (for example, activation codes showing Available, Downloaded, or Failed) and whether the device is currently registered and passing data on the cellular network using the intended profile. This helps confirm both successful provisioning and ongoing connectivity.

What eSIM allows you to do

  • Activate cellular service remotely. No physical SIM swap needed.

  • Switch carriers or plans digitally.

  • Enable secure provisioning for IoT devices, routers, and industrial equipment.

  • Reduce logistics costs (no SIM card shipping, no mechanical SIM tray).

Why eSIM is useful in IoT and Digi devices

  • Simplifies deployment of large fleets (remote provisioning).

  • Reduces failure points (no SIM tray damage).

  • Improves security through standardized provisioning flows.

  • Supports global deployments without handling multiple SIM card types.

eSIMs, profiles, and devices

A single eSIM can contain multiple profiles, but only one profile per eSIM can be active at a time. When an eSIM contains more than one profile, the same EID and device ID appear in more than one row in the table on the Profiles List tab, with each row showing a different ICCID and service provider.

A device can also contain more than one eSIM, depending on its modem configuration. A device with a single modem can hold two eSIMs, one in each SIM slot, and one eSIM can serve as failover for the other. A device with two modems can have two SIMs per modem, allowing two eSIMs to be active at the same time. In this case, the device shows one active profile for each active eSIM.

In simple terms

Digi eSIM technology enables carrier switching and provisioning without physical SIM changes so you have greater flexibility, control, and security in managing your wide-area networks.