View DHCP status to monitor which devices have been given IP configuration by the IX40 device and to diagnose DHCP issues.
Web
- On the main menu, click Status
- Under Networking, click DHCP Leases.
Log into the IX40 WebUI as a user with full Admin access rights.
Command line
- Select the device in Remote Manager and click Actions > Open Console, or log into the IX40 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
- Enter the show dhcp-lease command at the Admn CLI prompt:
> show dhcp-lease IP Address Hostname Expires ------------- --------------- ------- 192.168.2.194 MTK-ENG-USER1 192.168.2.195 MTK-ENG-USER2 >
- Additional information can be returned by using the show dhcp-lease verbose command:
> show dhcp-lease verbose IP Address Hostname Expires Type Active MAC Address ------------- -------- ------------------------ ------- ------ ----------------- 192.168.2.194 MTK-ENG-USER1 May 19 08:25:11 UTC 2021 Dynamic Yes ba:ba:2c:13:8c:71 192.168.2.195 MTK-ENG-USER2 May 20 11:32:12 UTC 2021 Dynamic Yes 09:eb:10:f0:bc:16 >
- Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.
PDF
